Especificaciones
Dimensiones 168 x 136 x 36 mm
(6.14 x 5.35 x 1.42″)
Peso 543 g
(1.2 lb)
Enclosure Metal, para uso en interior
Consumo Máx. 2 W
Interfaz de Red (4) puertos 10/100 Mbps
Administración Vía Ethernet + Wi-Fi (2.4 GHz)
Botón Reset
LEDs System, Output
Fuente de Alimentación Panel PV (Conectores H4)
Rango de Voltaje de Entrada del PV 10-60 V
(Protección Inversa, Protección contra sobre-tensiones)
Voltaje Máximo de Circuito Abierto: 60V
Corriente Máxima PV 10A
Control de PV MPPT
Interfaces de Salida 24 Vcc PoE Pasivo (Pines 4, 5+; 7, 😎
24 Vcc Terminal block 24 Vcc
Output Voltage Voltaje de la batería limitado a 24 V
(Protección contra sobre-tensiones)
Maximum Power Output PoE: 17 W, DC OUT: 24W, Max 40 W Total
Tipo de Batería 24 V SLA, AGM, Gel Lead Battery
Absorption Voltage Steps 27.4 V, 28.2 V, 29.1 V, 30 V
Float Charge Voltage 95% of Absorption Voltage
Max. Charge Current 7 A
Under Voltage Protection 22 – 23.6 V Software Configurable
22 V Hardware Protection
2 Priority Levels for Output Disable
Temperatura de Operación -20 a 50° C
(-4 a 122° F)
Certificaciones FCC/IC/CE

*Necesita arreglo de baterías a 24 V.

*Las baterías y los paneles solares no están incluidos.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Controlador de carga MPPT SunMax SolarPoint 24V 7A para interior con switch PoE pasivo 24V integrado para alimentar equipos airMAX”

Your email address will not be published. Required fields are marked

Controlador de carga MPPT SunM...

$86,771.37